Text Size

ELECTROVALVE N-100

Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
ELECTROVALVE N-100ELECTROVALVE N-100
Move your mouse over image or click to enlarge
_________________4d2e115caeb31.jpg

TYPE

Product SKU 04.04-2001-22-00
Description
  • 100% water tested

  • 150 psi (10,3 bar) rating

  • Unique “reverse flow” design permits equal pressure distribution on both
    sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure

  • Reverse flow design for water conservation in the event of failure

  • Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action

  • Molded shock cone for smooth operation and reduction of water hammer

  • Easy-to-use internal manual bleed lever; bleeds valve downstream; has
    positive stops for open and closed positions

  • Marine-grade S20P solenoid with stainless steel actuator

  • Engineering grade PVC body and cover with combination hex, slot and
    Phillips retaining screws

  • Non-rising flow control stem throttles valve from full open to closed position on flow control models

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

24VAC/60Hz

24VAC/50Hz

Inrush: 9.48 VA

Inrush: 10.66 VA

Holding: 5.11 VA

Holding: 5.97 VA

Do not use nominal voltage ratings listed above for sizing of valve wires.

 

Units in box: 10

Products

Shopping Cart

 x 
Cart empty

Verify by

Verify by

We have 109 guests and no members online

[ Reset Settings ]