Text Size

ELECTROVALVE 12000 Silver Bullet

Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
ELECTROVALVE 12000 Silver BulletELECTROVALVE 12000 Silver Bullet
Move your mouse over image or click to enlarge
_________________4d2e133caab70.jpg

TYPE

Product SKU 04.04-2001-32-00
Description

100% water tested

  • 150 psi (10,3 bar) rating

  • Unique “reverse flow” design permits equal pressure distribution on both
    sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure

  • Reverse flow design for water conservation in the event of failure

  • Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action

  • Molded shock cone for smooth operation and reduction of water hammer

  • Easy-to-use internal manual bleed lever; bleeds valve downstream; has
    positive stops for open and closed positions

  • Marine-grade S20P solenoid with stainless steel actuator

  • High-strength glass-filled nylon body and cover with ¼" stainless steel cover bolts and mating brass body inserts

  • Non-rising flow control stem throttles valve from full open to closed position on flow control models

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

 

24VAC/60Hz

24VAC/50Hz

Inrush: 9.48 VA

Inrush: 10.66 VA

Holding: 5.11 VA

Holding: 5.97 VA

 

Do not use nominal voltage ratings listed above for sizing of valve wires.

 

Units in box: 10

Products

Shopping Cart

 x 
Cart empty

Verify by

Verify by

We have 102 guests and no members online

[ Reset Settings ]